Grinding raw materials

Grinding raw materials is one of the more energy-consuming processes in the production of feed. Its task is to bring the raw material to the required particle sizes. This is especially important in the case of animal feed, because too large particles cause nutritional losses and too small leads to diseases of the digestive and respiratory systems.

 

Hammer mills in the TESTMER offer

Testmer designs and supplies hammer mills lines based on the following devices:

  • hammer mill  vertical  RB-P or horizontal RB-H – as the main milling device,
  • DS screw feeders  – ensuring proper feeding of the material,
  • WMS magnetic separators, aspiration devices – to eliminate unwanted metal waste in the raw material and to ensure raw material purity and reduce dust formation

 

The Hammer Mill  lines are each time adapted to the needs of customers in terms of performance, required grinding, adapted to the raw material used, acceptable dimensions etc.

Hammer Mills

Hammer Mills RB-P and RB-H  have been designed for grinding cereal grains, animal feeds, feed components and other similar materials. In RB-P Hammer Mills, the motor drives the direct rotor of the Hammer Mill. The Hammer Mill can be equipped with an electric motor with power from 11 to 110 kW. In models RB-P45 – 110 it is possible to use a 2-speed engine that allows to obtain the required grinding for various raw materials. Higher speed allows to obtain smaller fractions (e.g. feed for pigs), slower speeds guarantee the quality for  poultry. In addition, all Hammer Mills are ready to work with the inverter. Pneumatic or electric opening interlock as well as mechanical or pneumatic sieve replacement system were used as safety equipment.

To ensure the highest efficiency, shredders are delivered with an IE3 engine as standard,     in accordance with the requirements of the IEC 60034-30 standard.
On request, the engine and equipment of the Hammer Mill is delivered in ATEX version.

Basic parameters of hammer mills

Type

Power [kW]

Output Capacity [t/h] *

RB-P11

11

till 2,5

RB-P15

15

till 3.0

RB-P18

18

till 3.5

RB-P22

22

till 5.0

RB-P30

30

till 6.0

RB-P37

37

till 7.0

RB-P45

45

till 8.0

RB-P55

55

till 10.0

RB-P75

75

till 12.0

RB-P90

90

till 16.0

RB-P110

110

till 20.0

RB-H90

11

till 16

RB-H110

15

till 20

RB-H132

18

till 25

RB-H160

22

till 30

* –  Output capacity was achieved for wheat grain and 4 mm sieves. It may vary depending on the density of the material, humidity and its mechanical parameters.

Feeders

The feeders offered in the milling lines ensure even dosing of raw material to the hammer mill. The capacity of the feeder is smoothly regulated by a frequency converter. The feeder has a large inspection door that allows cleaning the inside of the feeder and a air filter.

The dimensions of the feeders are adapted to the size and performance of the hammer mills they will work with.

Magnetic separators

The magnetic separator is an effective device that does not require external  enery   

The capacity of the separator is determined by its diameter.

The basic parameters of magnetic separators for animal feed are presented below:

Type

Diameter [mm]

Flow rate [t/h] *

WMS-150

150

till 15

WMS-200

200

till 35

WMS-250

250

till 70

WMS-300

300

till 90

WMS-350

350

till 110

* – The flow rate is indicative for wheat grain. It may vary depending on the density of the material, humidity and its mechanical parameters.
We manufacture separators based on proven and durable magnetic components 

Separators and dust filter equipment

The TESTMER offer includes the following devices used in comminution lines:

  • stone or coarse sand separators,
  • patron dust filters with self cleaning, which ensure effective dust reduction and improved efficiency,
  • special tanks under the hammer mills to improve the reception of milled materialPlease  you to familiarize yourself with the entire TESTMER offer.

 

Please read full offer of TESTMER products.

Gallery

Hammer mill single line
Hammer mill single line
Hammer mills double line
Hammer mills double line
Milling and Mixing
Milling and Mixing
Screw feeder
Screw feeder
Magnetic separator
Magnetic separator

TESTMER - professional solutions for the feed production market

TESTMER WARSZAWA S.A. is the market leader in the production of technological lines for feed production in Poland. From 1991 we installed over 100 lines in Poland, Belarus, Ukraine, Russia, Italy and the Czech Republic.

The basic machine used in the feed production line is a pellet press. TESTMER started production of pelleting presses in 1991 and since then expanded its offer to include all machines related to the feed production process.

We offer warranty and post-warranty service for the feed production equipment purchased from us. Spare parts needed for the proper operation of the devices are produced by our specialized crew in our factory.

Our references are a long-term
cooperation with dozens of
clients